SHORT NOTICE ONLINE AUCTION SALE - CNC & MANUAL MACHINE TOOLS, GENERAL ENGINEERING & WORKSHOP EQUIPMENT (170724)
Auction details
| Sales Starts | 25 Jun 2024 @ 09:00 |
|---|---|
| Sales Ends | 11 Jul 2024 @ 13:00 |
| No. of Lots | 65 |
| Auction Catalogue |
Description
SHORT NOTICE ONLINE AUCTION SALE - CNC & MANUAL MACHINE TOOLS, GENERAL ENGINEERING & WORKSHOP EQUIPMENT (170724)
CNC MACHINES: HAAS TL1 CNC Lathe with Haas Control. (2008).HAAS TL2 CNC Lathe with Haas Control (Needs attention 2010). COLCHESTER 2000 CNC Lathe with Fanuc O-T Control (1992).
CONVENTIONAL MACHINES: CHESTER Turret Mill with Newall DRO (2002). COLCHESTER Student 1800 x 25'' Centre Lathe.AJAX AJT1 Turret Milling Machine with Slotting Head. BRAITHWAITE SP-150VS Turret Mill with DRO (2009). AMADA Cutmaster HA-250 Horizontal Bandsaw. STARTRITE Volant 24 Vertical Bandsaw. HERBERT Pillar Drill.
MISCELLANEOUS
SANDVIK Ejector Drilling Attachment with Power Pack, Drill Tubes & Tooling. MULTIFEED ML1 Short Magazine Barfeed. (2001).MITUTOYO 6' x 4' Inspection Table.. FERRANTI Cast Iron Table with 2 x Bench Vices. BOTT Workbench with Vice.6 x T Slotted Bedplates. Approx 17 Various Machine Vices. 4 x EWM Picotig 200 TG TIG Welders. BREN 626 Stencil Cutting Machine with Desktop Software. 2 x Pairs of Large Angle Plates. TROYKE 9'' & 12''Rotary Tables.Drill Vices.ER Collets. 4 x Tipping Skips. Divinding Head. Small Angle Plates. 10'' Bench Grinder. MITUTOYO 0-6'' Disk Micrometer.
JUNGHEINRICH EJC B16 Electric Pedestrian Fork Truck with Charger (2007).KAESER SK22T Screw Compressor (2011). NEDERMAN Mobile Fume Extractor (1998).
BUYERS PREMIUM 18%
Collection Details
Equipment can be loaded to Flat Bed transport free of charge and must be collected no later than Friday, 19th July 2024. Export packing can be quoted at extra cost.
Viewing Details
Viewing is available on site in Oldham, Greater Machester which is by appointment only with the auctioneers on 0161 345 3000. Visiting parties will need to wear Personal Protection Equipment. No Minors will be allowed onsite.
Notice To Purchasers
If you are purchasing the equipment with the intention of exporting from the UK you must comply with all the necessary UK export conditions associated with this type of equipment. In certain instances Export Licences will be required and it is the buyer’s responsibility to make the necessary enquiries prior to bidding. Please note under no circumstances must the goods be used to support equipment for the armed or internal security forces of Countries subject to UN, EU or OSCE arms embargo.
Available Lots
Lots 1-25 of 65
Lot 1: HAAS TL1 Flat Bed CNC Lathe with Haas Control (2008)
Swing over bed 508mm. Swing over the Cross-slide 240mm. Distance Between Centres 762mm. Travels X/Z 203/762mm. Maximum Cutting diameter 406mm. Bar Capacity 59mm. 190mm 3 Jaw Chuck. Rapid Feedrates 11.4m/minute. Spindle Motor Power 5.6kW. Spindle Nose ...
Lot 2: CHESTER Turret Mill with Newall DRO (2002)
Table size 1066mm x 229mm. Spindle taper R8.Spindle speeds 60-4200 rpm.Longitudinal powered feed. Coolant. Chip & splash guarding.
Lot 3: COLCHESTER Student 1800 x 635mm Straight Bed Centre Lathe
Swing over bed 330mm.Swing over cross slide 210mm. Spindle bore 40mm. Spindle speeds 22-1800 rpm. Fitted with 200mm dia. 3 jaw chuck. Quick change toolpost. Leadscew & feedshaft guarding.Lo volt light. Metric dials. E stop. Serial No.4/0001/05862
Lot 4: AJAX AJT1 Turret Mill with Slotting Attachment
Table size 1270mm x 254mm. Spindle taper ISO 30.Spindle speeds 48-3750 rpm.Longitudinal/Cross/Vertical (Knee) powered feed. Slotting strokes per min 46-245 Coolant. Splash garding. Serial No.34709 B 50096
Lot 5: COLCHESTER 2000 CNC Flat Bed Lathe with Fanuc O-T Control. (1992)
Swing over bed 400mm. Swing over cross slide 246mm. Distance between centres 1250mm. 8 station duplomatic turret.Spindle speeds 6-2750 rpm.Selection of Chuck jaws & tooling as lotted
Lot 6: BRAITHWAITE SP-150VS Turret Mill with DRO (2009)
Table size 1245mm x 230mm. Spindle taper R8. Spindle speed – Variable speed head (Low) 50 – 420 rpm). (High) 420 – 3900 rpm. Longitudinal & Cross powered feeds. Spindle motor 3HP. Anilam Wizard 411 DRO. Lo Volt light. Splash guard. Machine dimensions ...
Lot 7: AMADA Cutmaster HA-250 Horizontal Bandsaw
Capacity 250mm. Blade speeds 88-262 feet/min.Blade size 3500mm x 25mm x 0.999mm. Coolant pump/tank.
Lot 8: JUNGHEINRICH EJC B16 Electric Pedestrian Fork Lift Truck with Charger (2007)
Rated capacity 1600 kg.Load centre distance 600mm.Nominal power 1.5kW. Serial No. 90270152. Complete with SLT 110 Charger.
Lot 9: HAAS TL2 CNC Flat Bed Lathe with Haas Control (2010) - Requires attention
Fitted with 254 dia. 3 jaw chuck.Distance between centres 1219mm. Coolant/Pump. Quick change toolpost
Lot 11: HERBERT Pillar Drill with Rise & Fall Table
Table size 609mm x 609mm. Spoindle taper 3MT. Spindle speeds 74-1455rpm.
Lot 12: STARTRITE Volant 24 Vertical Bandsaw
Table size 482mm x 482mm.Blade speeds 50-180 feet/min. Blade Welder & Grinder
Categories
- View all lots
- View active lots
- Angle Plates (3)
- Barfeeds (1)
- CNC Lathe (3)
- Centre Lathes (1)
- Compressors (1)
- Drilling (2)
- Fork Lift Trucks (1)
- Fume Extraction Equipment (1)
- Granite Inspection Tables (1)
- Grinding (1)
- Inspection Equipment (1)
- Machine Vices (19)
- Milling (3)
- Rotary Tables (3)
- Sawing (2)
- Steel Tipping Skips (4)
- Stencil Cutting Machines (1)
- T Slotted Bedplates (6)
- T Slotted Cast Iron Cubes (1)
- Tooling (2)
- Welding Equipment (4)
- Workbenches (2)
- Workshop Equipment (2)
